305HS Engine

29hp Boxer UAV engine with electronic injection 120A brushless starter generator

Capabilities

  • Excellent light power/weight ratio
  • Low fuel consumption
  • Low cross sectional area
  • Very long life

Technical Specification

  • Engine: 305Hs
  • Type: Opposed two cylinder two stroke boxer
  • Output: 29.7HP at 7200 rev/min
  • Total Displacement:  312 cm3
  • Cooling System: Air > 25 m/sec
  • Fuel metering: Fuel injection into the throttle body
  • Ignition system: Programmed inductive discharging system managed by ECU
  • Exhaust system: Stubs/Mufflers
  • Communication from ECU to client system by: RS232 – CANBUS
  • Alternator: Brushless 120A
  • Rotation: Counter clockwise (looking at propeller side)
  • Fuel: ≥ 95 Oct. petrol/oil mixture 2% synthetic oil for 2 stroke engines
  • Weight: 13,00Kg with generator
  • Specific consumption: Better than 350gr/HP/h
Engine 305

Configuration

  • ECU
  • Fuel pump
  • Fuel regulator
  • Spark plugs
  • Stubs
  • HT coils
  • 120A Brushless Starter Generator
  • 28V External Regulator
  • Double ignition
  • Throttle body with servo and air box filter
  • Rubber mounting system
  • Ground test software, data logger and engine map upgrade system
  • CD instruction manual and software
  • Pre – mounting measured tolerance certificate
  • Sensors on the engine:
    • 2 x EGT
    • 2 x CHT
    • 2 x Throttle position
    • 2 x Crankshaft position
    • Air temperature
    • Three Axis Accelerometer
    • Fuel pressure
    • Atmospheric pressure
  • Output Voltage
  • Input voltage
  • Temperature
  • Power in use
  • Fuel consumption in real time
  • Ignition Coils (diagnostic)
  • Injector (diagnostic)
  • Throttle servo (diagnostic with auto recovery)
  • Fuel pump (diagnostic with auto recovery)
  • Pick ups (diagnostic with auto recovery)
  • Set of mufflers
  • Harness (for ground test only)
  • Starter driver card

Curves

Dimensions

dimensioni 305h

Optional Extras

Exhausts Mufflers

Set of Mufflers

Starter Driver Card

Starter Driver Card

Zanzottera Technologies S.r.l.
Società a socio unico

Via Italia, 105/107
22010 Grandola ed Uniti (Como) Italy
Tel: +390 344 32686 – Fax: +390 344 32825
Codice Fiscale e Partita IVA 03766920965
C.C.I.A.A. Como N° 03766920965
Privacy and Cookie Policy
Web design by Alkimedia

Logo Zanzottera